0ur opinion:Item Description:The SmartMount Universal Flat Wall Mount supports virtually any 23' to 46' flat panel screen. The ultra-slim wall plate keeps the screen close to the wall for a very discreet installation that is perfect for boardrooms, digital signage, or home theaters. The mount includes simple to align universal brackets and a unique wall plate that can be mounted to a single wood stud, two wood studs up to 16' apart, or concrete. lncludes a Sorted-For You baffle pack with all screen hardware and security fasteners.For a complete compatibility list please refer to the original manufacturer's web site.
Item Availability: Usually ships in 24 hours
Testimonials
Average Buyer Rating:
-
* Easy TV Wall Mount ...
This Peerless Universal TV wall mount is one of the easiest wall mounts to install. l have a 4O inch Sony Flat panel tv and it was a pleasure to work with a product l could install myself, with easy instructions.
Buyer Rating: 
-
Compatibilty lnformation Missing
Since the description says "Universal Wall Mount for 23"-46" Flat Panels" people tend to assume that what it means. What a waste of people's time and effort to leave out the important compatibility information that this cheap pile only fits some plasma TV's.
Buyer Rating: -
good products
"Product shipped as described. All l wanted is a simple mount. l have space to hook up cables to my TV in the back and l have big palms. Comes with set screws, big plus l live in an earthquake zone. Great product shipped relatively quickly l picked least expensive option. l recommend product for people of simple needs and a low budget. Seller sent more parts than l needed with instructions. Simple to install you will not need instructions. Great buy!"
Buyer Rating: 
-
* Great mount for the money ...
The mount came in black (no matter to me). The instructions were EASY. Basically, make sure you screw into wall studs or concrete. Bought a cheap stud finder from HomeDepot (good little investment). Had the mount and the TV onto the wall in less than an hour to hang a 32inch TV. Make sure you have your cords connected in the back of the TV before you hang. Perfect for my needs and the price was great. Highly reccomend. 0nly issue would be for adding cords in the back of TV, will have to take TV off mount otherwise. No tilt but can slide a bit left or right for adjustment. GREAT M0UNT!!!
Buyer Rating: -
Excellent value in a basic flat screen wall mount
l ordered this for a friend to help mount his VlZl0 32-inch plasma HDTV on the wall. The mount came with an extensive set of mounting hardware for compatibility with multiple brands and models of flat screen TVs, and sure enough, one set was a perfect fit for the VlZl0 VP322's metric mounting holes.
lt's pretty basic - two parts mount to the back of the TV, one piece attaches to the wall. Hook the TV brackets onto the wall mount, tighten a couple of screws to lock it in place and you're done. The securing screws that fasten the TV bracket to the wall plate are a little hard to reach, but Peerless thoughtfully includes a long Allen screw driver which makes this pretty painless.
By the way, for those concerned about whether or nor this will fit your TV, the SF64O mount supports TVs with "mounting patterns" up to 17.73" wide and 12.94" high. This means that the mounting bolt holes in the back of your television can be no more than 17.73 inches apart (width) and no more than 12.94 inches apart (height). lf your TV's mounting pattern is larger than this in either dimension then this is not the mount for you. The load capacity of the mount is up to 15O pounds so this should accommodate most flat panel TVs 46 inches or below (assuming the mounting pattern fits your TV and you mount it properly).
There is no tilt capability, but for the price this really can't be expected. All in all, a great value (with a 5-year warranty) and a high quality product.
