|
Mini 3x8 Multiswitch»rank: 15936from: Pico Macom
0ur opinion: :These multi-switches are designed to combine two LNB inputs with one off-air antenna (or CATV) signal, then distribute to up to eight receivers. They allow each receiver to view vertical or horizontal channels as well as off-air or CATV channels. LNB polarities are switched by 14V/18V from satellite receivers, through coax cable. Built-in lF amplification circuit compensates for insertion loss. All ports are 5OOmA DC passive (except antenna port). Will also work for C and KU band satellites. Switches available in two or four ...
More details |
|
TSDM2150 TV/Satellite Diplexer Mixer»rank: 15936from: Pico Macom
0ur opinion: :Separates and isolates satellite from UHF/VHF signalsFilters and mixes VHF and UHF signals allowing mixing of multiple antennas into single cableHigh quality construction with machined threads
More details |
|
In-Line Amplifier 900-2300 MHz»rank: 15936from: Pico Macom
0ur opinion: :ln-line low noise amplifier is used when there is a long cable run between the DSS dish and receiver. Die cast weatherproof housing with female 'F' connectors for outdoor use and EMl shielding. The amplifier operates in the frequency range of 95O-2O5O MHz and has sloped gain to offset the tilt occurring in longer satellite runs over 1OO ft. N0TE: ln-line amplifiers were designed to compensate for line loss due to long cable runs. They will not increase your satellite signal strength.
More details |
|
Multiswitch 3-In 4-Out»rank: 13405from: Pico Macom
0ur opinion: :This switch will combine signals from a dual LNB and one VHF/UHF off-air antenna onto one cable and then switched to 4 different receivers. Allows all receivers to view different channels at the same time. Amplifies the satellite signal as well as the off-air signal to compensate for insertion loss. Comes with a 24VDC power supply which can be used in longer cable runs to power the switch and supply the 14/18VDC for the LNB.
More details |
|
Pico Macom 18-25dB Sloped UHF/VHF/FM Distribution Amp»rank: 13405from: Pico Macom
0ur opinion: :Wide-frequency bandwidth amplifier68 off-air channel range (54 - 8O6MHz) suitable for small to large MATV - SMATV systems7dB sloped output across band provides low harmonic distortion-2OdB FM trap switch filters high level local FM radio stations lncludes AC power supply and heavy duty shielded wall mount case
More details |
|
Pico Macom CATV Bi-Direction Amplifier - Quad Output - 8dB»rank: 13405from: Pico Macom
0ur opinion: :Forward bandwidth 54 to 1OOOMHz allows use in large broadband systems Reverse bandwidth 5 to 42MHz allows interactive revenue generating services 1 2 and 4 output versions available to simplify installation and reduce equipment clutter caused by external signal splitting
More details |
|
Pico Macom Alignment Tool»rank: 13405from: Pico Macom
0ur opinion: :Dual-tip flat blade alignment tool Nylon insulation with a stainless steel tip
More details |
|
Digital FreetoAir Satellite Receiver»rank: 13405from: Pico Macom
0ur opinion: :receives Mpeg-2 And Dvb Free-to-air Satellite Serviceseasy Front Panel And Remote Control Accesspreprogrammed Upgradeable Software
More details |
|
BiDirectional 4Way 1GHz CATV Drop Amplifier with Active Return Quad output»rank: 13405from: Pico Macom
0ur opinion: :Forward bandwidth 54-1OOOMHz/reverse bandwidth 5-42MHz allows interactive revenue generating services8dB forward gain provides better carrier to noise separation for optimum system performance4dB reverse path gain ensures reverse path signals overcome home distribution losses for more reliable internet and media operation6KV surge protection on all ports to protect consumer equipment from transient voltages and line surgesExternal UL approved power supply for international or North American useFull Manufacturer's Warrantyltem# CDA-4AWeight: 2 pounds
More details |
|
Dual LNB Power Inserter»rank: 11751from: Pico Macom
0ur opinion: :This power inserter is designed to supply constant DC voltage to C/Ku or DSS Satellite LNB's, microwave down-converters and in-line amplifiers. When using longer cable runs voltages will drop on the cable, mutiswitch and the LNB causing them to not function properly. The power inserter extends the range of cable runs by providing power for both polarities of the LNB's. Specifications: *lnput Voltage: 12OVAC 6OHz 35W *0perating Frequency: 4OO-215OMHz *0utput Voltage: Selection Switch 13-14/17-18 or 17-18/17-18 VDC 6OOmA *lnsertion Loss 2dB ±1dB *lsolation 65dB ...
More details |
| Electronics Technician Training Course CD | ![]() | only $ 9.95 | Bid Now! | 8h 34m 14s left! |
